Sunday, March 2, 2014

Stained Glass with Alcohol Paint



Clean the glass first with rubbing alcohol. Add a drop or two of alcohol ink at a time and then shoot the paid with the canned air. 

Note: Read the alcohol ink labels, some warn about giving off toxic fumes when heated, so beware if you're using this craft near an open flame.


How to make your own Alcohol Paint:
Kool-aid
Rubbing alcohol
Spray bottle

They are easily and cheaply made with every day ingredients. Take an empty small spray bottle and the Kool Aid powder of your choice.  Place the Kool Aid in the bottle, fill it up almost to the top with rubbing alcohol. Shake to dissolve and that’s it! 

Add more or less powder, depending on how intense you want the color. 






Wednesday, July 24, 2013

Shaving Cream Easter Eggs


Method:
Get some cheap white shaving cream, and spread out on a cookie sheet.

Dribble food coloring across the surface. Neon food coloring makes cooler looking eggs.

Use toothpicks to swirl the colors around in the shaving cream.

Take your dried, and cooled hard  boiled egg, and roll it around in the cream. You can use sandwich baggies as gloves to help keep the coloring consistent, keep finger prints off, and keep from coloring “you”.

Sit colored eggs to the side on a paper plate and allow them to dry for five minutes.

After allowing the eggs to sit, wipe off shaving cream and rinse with water!

There you have it, a quick, easy, and inexpensive way to get some very cool looking eggs for Easter.

http://kygl.com/how-to-make-shaving-cream-easter-egg-dye/

Sunday, March 24, 2013

Rolled Flowers




http://www.splitcoaststampers.com/resources/tutorials/rolledflowers/

Can I just tell you - I am OBSESSED with making these flowers! I have read many tutorials - like this one at SplitCoastStampers on how to make these out of paper. So the other day, I was flipping through my piles (many, many piles) of magazines and catalogs, and I had an idea! Why not recycle these catalog pages and turn them into cute paper flowers? No need to buy any fancy paper, these turn out just as cute or even cuter! For a tutorial on how to roll the paper, click HERE. She actually uses "glue spots", I just used regular Elmer's glue. It's super easy!




Cardstock or Patterned Paper
Scissors
Glue Dots
Pencil
Step-by-Step
Step 1
Round the corners of the cardstock with a pair of scissors.

Step 2
Using a pencil, draw a spiral, starting from the outside and working in to the center.

Step 3
Cut all the way along the spiral.

Step 4
Lightly crumple the paper, to loosen the fibers of the paper, which will make the next step easier.

Step 5
Begin on the outside of the spiral, and roll your flower up from the outside all the way back towards the center.

Tip:
Gently crumple the paper slightly as you are rolling it into the flower to make it more pliable.

Step 6
Continue rolling all the way till you’ve rolled up the entire length of the spiral. This will be uneven and messy looking, but just keep rolling.

Step 7
When you have the bloom fully rolled up to the center, bend back the outside edges to open up the bloom into a rosette. This shows off the pretty patterned paper you’ve selected.
Release the bloom and let it uncurl slightly to bloom.

Tip:
Once you have it in a shape that you like, flip it over and anchor it together with a glue dot.

Finished bloom – in both sizes

Tip:
Optionally, you can adorn your bloom with distress inks, glitter sprays or glitter. I chose to give mine a coating of Crystal Effects with a paintbrush, and then added some glitter.


Step 8
Sample created with big bloom.


Read more: http://www.splitcoaststampers.com/resources/tutorials/rolledflowers/#ixzz2OWV5SfYV

Paper Dahlias



http://www.marthastewartweddings.com/226340/paper-dahlia?center=0&gallery=274777&slide=241880


You will need:

Dahlia bulbs, Swan Island Dahlias

Tissue paper (we used colored tissue paper in azalea (CT1AP), $11.95 for 480 sheets)

String or heavy thread

Ribbon

To wrap the bulb, stack two pieces of tissue paper and fold them in half side to side, then top to bottom.

Download the PDF of our dahlia template, and print onto standard printer paper. Cut out template; then lay on top of folded tissue paper, aligning straight edges of template with the two folded edges of the tissue paper. Trace lightly around the template, and then cut on the line to create a tissue-paper dahlia. Open tissue paper and rotate top sheet slightly so the petal tips are staggered.


Wrap the bulb in another layer of tissue paper, and place it in the center of the tissue-paper dahlia. Wrap the tissue-paper dahlia around the bulb, drawing the sides up and to the center; secure with string (leave ends long for now).

To make the tags, download the PDFs of both the initials tag and the planting-instructions tag.

For the initials tag, type in your first initials and wedding date. Print onto 8 1/2-by-11-inch card stock.


For the planting-instructions tag, print onto card stock.

Using a 1 1/2-inch circle craft punch, punch out each tag. (Turn the craft punch upside down, so you can see the positioning of the design in the hole of the punch.)

Place an initials tag on top of an instructions tag, and use a small hole punch to make a hole through the top center of both tags.

Thread string through the holes and tie; trim ends.

Wrap a pretty ribbon around to cover up the string, and tie.

Paper Mums

http://www.ellinee.com/blog/wp-content/uploads/2012/10/PlumPaperMum1.pdf

http://www.ellinee.com/blog/wp-content/uploads/2012/10/OrangePaperMum.pdf

Sunday, August 26, 2012

DIY Geometric Favor Boxes


Instructions:

link to template here

Print the template onto thin cardboard stock or thick paper in the colors of your choice. We chose a set of strong colors, but these would also look super-cute in pastels or in gold, silver and/or bronze.

Cut out along the straight lines, then fold along the dotted lines. Make sure you crease all folds into the same direction: over the dotted lines, so these will be inside the box.

Try to assemble the box without gluing it first, so you can see which sides go where. The important sides to mark are the lid and the fold-over side (this is the last side to glue). You could mark those parts with a pencil line or a little piece of masking tape that you can remove in the end.

Now you can start to assemble the boxes with paper glue. Fold the last assembly piece (the one before the lid piece) into the box and fix with glue.

Cut out small strips of paper and add texts. We hand-wrote ours, but of course you can also print out some in a font of your choice. 

Now your boxes are ready to be filled with goodies. If you use heavy or breakable favors, add some thin strips of tissue paper to pad the boxes.

Sunday, March 4, 2012

Big Leaf Printing


It's a project most people are familiar with.

I used the lid of my cake pan to hold the paint you are free to add colors as you liked...just a bit, spread around works very well.

Leaf
Then press a large leaf into the ink...I used a big leafed plant in my garden (I have no idea what it is)

Then we transfered the leaf to the paper. You need to press down all around the leaf...making sure to press all the way to the corners. It takes a minute or two to do this.

Carefully lift the leaf off the paper.

The results of the mixed colors are striking.

Monday, February 20, 2012

Chocolate Stout Shake

Ingredients
1/4 cup stout beer
1/2 cup prepared chocolate fudge ice cream topping
1/2 gallon vanilla bean ice cream
1 cup milk
6 purchased chocolate-and-nut-covered pretzel rods (optional)

Directions
In a small saucepan heat beer and chocolate topping until warm and combined. Cool slightly.

Meanwhile, in a blender combine ice cream and milk, half at a time. Cover and blend until combined. Divide ice cream mixture among 8 glasses. Drizzle with chocolate sauce and, if desired, serve with chocolate-covered pretzel rods. Makes 8 servings.

Sunday, November 13, 2011

Waxed Leaves

Waxed leaves

Make sure your leaves are completely dry.

Melt some beeswax in a double-boiler. You can use new wax or old candle stubs (optional - add a few drops of cinnamon oil).

When the wax is thoroughly melted, take the leaves by the stem and immerse them, one at a time, in the wax. Hold them over the pot to drip a bit, then lay them on waxed paper to dry
.

Thursday, September 8, 2011

Glitter Glass Magnets

Use glitter instead of scrapbooking papers and fabrics on your small 3/4″ glass beads.

First, put a glob of glue on a plate. Dip the bottom of the bead into the glue, then turn it facedown to sit on a sheet of paper, so the glue is facing up. Do many of these at a time.

Then sprinkle glitter over top of each of the beads. Do not press down to embed the glitter into the glue. This will reduce the sparkle of the glitter. You want the glitter to sit roughly.

Set a different sheet for each colour of glitter you want to do.

Wait for the glue to fully dry for a full day. Shake the excess glitter off. Then dip the glitter again in a second coat of Mod-Podge. You can place your magnet or thumbtack directly into this second coat of glue. Place them face down again, and let them dry overnight again.

NOTE: if you are doing the magnets, place them far enough apart so the magents don’t slide off the bead because it is within the magnetic force of the one next to it.

Sunday, August 28, 2011

Bath Bomb


Supplies:
2 Cups Baking Soda
1 Cup Citric Acid
4 teaspoons massage oil ( or 2 teaspoons essential oil and 2 teaspoons olive oil)
Spray bottle with water
Mmold (60 mm 2 part plastic ball) (I am also thinking the bottoms of two large Easter eggs could be used)

This amount only made 5 bath bombs. If I was making more I would buy the citric acid online in bulk. The small bottle purchased at a local health food sotre cost $2.50.

Directions:
Mix baking soda and citric acid in large mixing bowl. Mix very well! You can use an electric mixer if you like.

Add in 4 teaspoons of scented massage oil (or other combination of skin safe essential oil for scent and another oil for moisturizing the skin). The scent is personal, so start with a teaspoon or so and add more until you are satisfied. Mix well.

This next step can be a bit tricky because you don't want your bath bomb to start fizzing. Start by adding a couple of fine mist sprays of water to your mixture and mix well.

You will continue spraying until the mixture will clump in your hand when squeezed. (I used 5-8 sprays, however this will depend greatly on your local climate)

Fill one half of your mold. Pack it tightly. Fill the other half of the mold and place them together---don't snap together. I slightly overfilled each half. When I pushed the two halves together they became a ball.

Gently remove the ball from mold. If I had problems with the ball coming out easily I dumped the mixture back into my bowl, added a mist of water (carefully), mixed well and then tried again.

Saturday, August 27, 2011

Tiny Pinata



These are from the October 2001 issue of Martha Stewart Living. In that project they are made as small jack’o'lanterns, skulls, or small orange candy containers. I figured they’d work well as an interesting gift container for anything small. I also plan on using these for easter eggs.

A few tips from my experience:

I used straight laundry starch because I had some lying around the house, and it worked great, created a nice hard shell. I’m sure the same thing can be done with white glue mixed with water or homemade wheat paste. For a more permanent decoration I’m sure modge podge would be perfect. The project in the magazine calls for wheat paste powder from a hardware store but that’s going a bit far.

I used the instructions for the skull project – which is to tear petal-sized pieces of tissue paper, so the rough edges will form a seamless look.

When starting I didn’t brush any starch on the balloon itself, I just put the tissue paper down and brushed over it, and over the edges to the balloon. For the subsequent layers I went crazy with the starch. This seemed to allow the balloon to pull itself free more easily. I had no troubles with the shell collapsing.

I hung mine to dry by hanging it from a loop of string. They hung from my overhead light. They took a few hours to dry. I left mine to hang overnight and they were dry all the way through.

I tested how different numbers of layers worked. The magazine project called for four, which seems very sturdy and that was fine. Anything less is too delicate to hold anything inside.

Popping the balloon calls for grasping it tightly just above the knot, cutting a tiny hole and allowing the air to flow out slowly. Hold the shell loosely in your other hand and let the balloon pullitself free. In my experience the balloons pulled away from the inside without and trouble and came right out.

I’m planning on putting small presents, small candies and large tissue paper confetti inside of these. But I think they would be great as easter eggs, romantic notes, to hold battery powered lights.

For Valentine’s Day I made little balloons, pasted on two layers of yellow and one layer of red. I left the opening as a long thin gash rather than a round hole, this helped create a seamless look at the end, instead of a flat papered over area. The first ones I gave as gifts were just sealed and were hard to start to rip open. So I added a pull string which will start the hole. After I stuffed them, I put a loop of string halfway into the shell and papered around it. It works pretty well.

They were a lot of messy fun to make. Oh, and warning: the dye will work itself onto your fingers, but it comes right off, almost.

Thursday, August 25, 2011

Chocolate Party Spoons


Chocolate Party Spoons

Paper Top



Directions:
To make these paper tops you will need some old newspapers and toothpicks.

1. Mark and cut the newspapers in even stripes.

2. Glue ends of stripes to each other so you get one long strip (in a nice messy pile).

3. Glue the stripe to the toothpick and start wrapping. Make sure to tighten the paper every once in a while as much as you can. The tighter the better.

4. Once it is finished, you can adjust the shape to a cone if you wish.

Spin, spin, spin!