DIY Geometric Favor Boxes

Instructions:

link to template here

Print the template onto thin cardboard stock or thick paper in the colors of your choice. We chose a set of strong colors, but these would also look super-cute in pastels or in gold, silver and/or bronze.

Cut out along the straight lines, then fold along the dotted lines. Make sure you crease all folds into the same direction: over the dotted lines, so these will be inside the box.

Try to assemble the box without gluing it first, so you can see which sides go where. The important sides to mark are the lid and the fold-over side (this is the last side to glue). You could mark those parts with a pencil line or a little piece of masking tape that you can remove in the end.

Now you can start to assemble the boxes with paper glue. Fold the last assembly piece (the one before the lid piece) into the box and fix with glue.

Cut out small strips of paper and add texts. We hand-wrote ours, but of course you can also print out some in a font of your choice. 

Now your boxes are ready to be filled with goodies. If you use heavy or breakable favors, add some thin strips of tissue paper to pad the boxes.